Carbide Kings

Industry News

Does the 2026 Tungsten Scrap Rule Affect My Carbide? A Plain-English Answer for Sellers

New US rule requires domestic sales of tungsten scrap. What it covers, who counts as a US person, how exceptions work, and why most sellers are unaffected.

By Carbide Kings9 min read
Tungsten carbide scrap cutting tools ready for recycling

If you sell your carbide scrap to a buyer in the United States, this rule almost certainly changes nothing about how you sell it. The requirement it creates is that covered tungsten scrap stays in the country — so a seller who was already selling domestically is already doing what the rule asks. The sellers it actually affects are those who export, or who move material to an affiliated company abroad.

That is the short answer. The rest of this article explains what the rule says, who it applies to, the two definitions that catch people out, and what to do if you do need to sell outside the United States.


This article is general information, not legal, export-control or regulatory compliance advice. Whether any particular material falls under the rule depends on its classification and the circumstances of the sale. For advice about your own business, consult a qualified compliance professional or review the official regulation directly.

Carbide Kings is not affiliated with, endorsed by, or acting on behalf of the U.S. Government, the Department of Commerce, or the Bureau of Industry and Security.


What does the rule actually require?

On 6 August 2026 the Bureau of Industry and Security published a temporary final rule under the Defense Priorities and Allocations System. It is Federal Register document 2026-16078, published at 91 FR 50701, and it followed a Presidential Determination of 30 July 2026 issued under section 101 of the Defense Production Act.

The requirement itself is short. From 27 August 2026, US persons engaged in the sale of covered tungsten waste and scrap must allocate 100 percent of their monthly sales to US persons, unless BIS grants an adjustment or exception in advance. Covered material must remain physically within the United States unless BIS authorizes otherwise.

Detail
Material coveredTungsten waste and scrap under Schedule B code 8101.97.00.00
Requirement100 percent of monthly sales allocated to US persons
In force27 August 2026 through 27 August 2027, unless extended
Issued byBureau of Industry and Security, Department of Commerce
Citation91 FR 50701 · Document 2026-16078 · Docket 260804-0143
AuthoritySection 101, Defense Production Act; 15 CFR Part 700
Public commentCloses 4 November 2026

The same order covers battery black mass under separate Schedule B codes. That part does not concern carbide sellers.

Who counts as a US person?

The rule defines this more simply than people expect. A US person is any individual, corporation, partnership, association or other organized group of persons located in the United States. "United States" means any state, territory or possession, plus the District of Columbia.

It is a location test, not a citizenship or ownership test. A company located in the United States is a US person for the purposes of this order regardless of who owns it.

So for a machine shop in Ohio selling worn inserts to a buyer in North Carolina, both parties are US persons and the sale satisfies the requirement without anything changing.

What counts as a sale? This is the part people miss

The rule defines "sale" broadly, and this is where a business can be caught out without ever thinking of itself as an exporter.

Alongside ordinary transactions, the definition covers deliveries to other persons — including deliveries to a company's own affiliates and subsidiaries, and deliveries from one branch, division or section of a single entity to another under common ownership or control.

In practical terms, a US manufacturer that has always shipped its spent carbide to a sister plant abroad for consolidation may be making a covered sale under this definition, even though no money changes hands and nobody in the business would describe it as an export sale. If your scrap currently leaves the country through an internal transfer of that kind, this is the provision to take to your compliance advisor.

Is my carbide actually covered?

The order applies to material classified under Schedule B code 8101.97.00.00, described as tungsten waste and scrap. Not every tungsten-bearing item is automatically within that classification, and whether a particular lot falls under it depends on the material and the circumstances.

This is a classification question rather than a judgment call, and it is one worth getting right rather than assuming either way. If you are unsure, the classification should be confirmed with a qualified compliance professional — not estimated from an article, including this one.

What is worth saying plainly is that for a domestic seller, the answer often does not change the outcome. If you are selling to a US buyer, the material staying in the country is already what happens.

What if I need to sell outside the United States?

The rule provides for adjustments and exceptions, granted by BIS on a case-by-case basis. Requests must be made in writing, and the rule names five grounds among others BIS will consider:

  1. The domestic sales requirement causes undue or exceptional hardship not suffered generally by others in similar circumstances.
  2. Complying would be contrary to the intent of the Defense Production Act or the regulation — for example, because it would reduce the domestic supply of covered material.
  3. The material is being sent abroad for processing or refining, and the processed material will be returned to the United States.
  4. Compliance would cause irreparable harm to the US person subject to the order.
  5. Additional time is needed to comply.

Requests go to BIS in writing and must contain a complete statement of the facts, a full statement of why relief should be granted, and supporting documentation. BIS states that it intends to respond within 14 days.

One detail matters more than the rest: submitting a request does not suspend the obligation. The requirement continues to apply while a request is being considered, unless interim relief is granted in writing. Assuming otherwise is the most likely way for a well-intentioned business to end up out of compliance.

What records should I be keeping?

The rule brought in a new information collection, and the categories BIS identified give a reasonable indication of what matters: buyer information, the applicable material and Schedule B code, the quantity of material, and the value of the sale.

For most sellers this is not a new burden so much as a reason to keep what you already receive. A written quote, a weight ticket showing the verified weight, and a payment record between them capture most of it. If you are selling regularly, keeping those together by month rather than scattered across emails is the practical step.

A buyer who provides clear documentation as a matter of course makes this straightforward. A buyer who does not is worth reconsidering for reasons beyond record-keeping.

When does this end?

The order is temporary. It expires on 27 August 2027, one year from its effective date, unless BIS adjusts or extends it before then through a further Federal Register publication.

BIS has also said it may add other materials to the order at any point, with notice published in the Federal Register. Anyone handling other critical minerals is worth watching that space.

Selling carbide scrap domestically

Carbide Kings is a tungsten carbide buyer based in Charlotte, North Carolina, purchasing from machine shops, manufacturers, industrial operations and individual sellers across all fifty states. Material is received at the Charlotte facility or collected for larger commercial lots, weighed on calibrated scales, and paid after verification.

For a seller whose material stays in the United States, the selling process is the same as it was before 27 August 2026. What happens after you request a quote walks through it, and Materials We Buy lists what is accepted.

Call (980) 515-7064 or use the quote form. For the rule itself, see our summary of the 2026 tungsten scrap requirements, which links to the official Federal Register document.


Disclaimer: This article is for general informational purposes only and does not constitute legal advice, export-control advice, or regulatory compliance guidance. Regulations governing tungsten and critical mineral scrap are subject to change. Consult a qualified legal or compliance professional for advice specific to your business and circumstances.


Frequently asked questions

Can I still sell my carbide scrap?

Yes. The rule does not restrict selling carbide scrap — it requires that covered tungsten waste and scrap be sold to US persons rather than exported. A seller already selling to a domestic buyer is doing what the rule requires, and nothing about the transaction changes.

Do I need a license to sell tungsten carbide scrap?

No license is required to sell covered material to a US person. A BIS authorization is needed only to sell outside the domestic sales requirement, which means selling to a person located outside the United States, and that is requested as an adjustment or exception in advance.

Who counts as a US person under the rule?

Any individual, corporation, partnership, association or other organized group of persons located in the United States, including its territories, possessions and the District of Columbia. It is a location test rather than a citizenship or ownership test.

Does sending scrap to our own overseas plant count as a sale?

It may. The rule defines "sale" to include deliveries to affiliates and subsidiaries, and deliveries between branches or divisions under common ownership or control. An internal transfer abroad is worth raising with a compliance professional rather than assuming it falls outside the requirement.

What if I need to export covered tungsten scrap?

Adjustments and exceptions are available from BIS on a case-by-case basis, requested in writing with supporting documentation. The rule names five grounds BIS will consider, including material sent abroad for processing that will return to the United States. Submitting a request does not suspend the obligation while it is pending.

How long does this rule last?

It runs from 27 August 2026 through 27 August 2027, one year from its effective date, unless BIS extends or adjusts it through a further Federal Register publication before then.

tungsten carbidecarbide recyclingsell carbide scraptungsten scrap ruleBIS regulationcarbide buyerSchedule B 8101.97US persontungsten scrap export rule

Have tungsten carbide scrap to sell?

Contact Carbide Kings for a fast quote on your carbide scrap.